RG58 - definitie. Wat is RG58
Diclib.com
Woordenboek ChatGPT
Voer een woord of zin in in een taal naar keuze 👆
Taal:

Vertaling en analyse van woorden door kunstmatige intelligentie ChatGPT

Op deze pagina kunt u een gedetailleerde analyse krijgen van een woord of zin, geproduceerd met behulp van de beste kunstmatige intelligentietechnologie tot nu toe:

  • hoe het woord wordt gebruikt
  • gebruiksfrequentie
  • het wordt vaker gebruikt in mondelinge of schriftelijke toespraken
  • opties voor woordvertaling
  • Gebruiksvoorbeelden (meerdere zinnen met vertaling)
  • etymologie

Wat (wie) is RG58 - definitie

TYPE OF COAXIAL CABLE
Rg-58; RG58; RG 58

RG58         
<networking, hardware> A common, low-impedance (52 ohm), quarter-inch diameter coaxial cable with BNC connectors, used for 10base2 Ethernet wiring, sometimes called "cheapernet" in comparison with "full spec" RG8 cabling. A member of the "Radio Guide" series. (2002-06-17)
RG-58         
RG-58/U is a type of coaxial cable often used for low-power signal and RF connections. The cable has a characteristic impedance of either 50 or 52 Ω.

Wikipedia

RG-58

RG-58/U is a type of coaxial cable often used for low-power signal and RF connections. The cable has a characteristic impedance of either 50 or 52 Ω. "RG" was originally a unit indicator for bulk RF cable in the U.S. military's Joint Electronics Type Designation System. There are several versions covering the differences in core material (solid or braided wire) and shield (70% to 95% coverage).

The outside diameter of RG-58 is around 0.2 inches (5 mm). RG-58 weighs around 0.025 lb/ft (37 g/m), exhibits approximately 25 pF/ft (82 pF/m) capacitance and can tolerate a maximum of 300 V potential (1800 W). Plain RG-58 cable has a solid center conductor. The RG-58A/U features a flexible 7- or 19-strand center conductor.

Most two-way radio communication systems, such as marine, CB radio, amateur, police, fire, WLAN antennas etc., are designed to work with a 50 Ω cable.

RG-58 cable is often used as a generic carrier of signals in laboratories, combined with BNC connectors that are common on test and measurement equipment such as oscilloscopes.

RG-58 in versions RG-58A/U or RG-58C/U was once widely used in "thin" Ethernet (10BASE2), for which it provides a maximum segment length of 185 meters. However, it has been almost completely replaced by twisted-pair cabling such as Cat 5, Cat 6, and similar cables in data networking applications.

RG-58 cable can be used for moderately high frequencies. Its signal attenuation depends on the frequency, e.g. from 10.8 dB per 100 m (3.3 dB per 100 feet) at 50 MHz to 70.5 dB per 100 m (21.5 dB per 100 feet) at 1 GHz.